5
discoverbattery.com
4. Installing and Connecting LYNK to the Sol-Ark Network
4.1 Installing the LYNK Edge Card
The LYNK Edge Card for Sol-Ark is a Slot 0 Type which only inserts into the left side slot on the bottom of the LYNK
Communication Gateway.
▲
NOTE
•
The LYNK Edge Card type to be used is determine by the brand of power
conversion equipment.
•
If LYNK Edge Card is in the wrong slot, it will not function.
•
If LYNK Edge Card is not firmly seated, it will not function.
M8” bolt (supplied with battery)
Copper compression lug
Shrink-wrap to
color-code the cable
Terminal surface
Lock washer (supplied with battery)
Flat washer (supplied with battery)
Battery cable lug
Ensure nothing is between
the terminal surface and the
battery cable lug
Sol-Ark Edge Card is a
Slot 0 Type Card
▲
CAUTION
HAZARD OF EQUIPMENT DAMAGE
•
Do not plug the AEBus RJ-45 cable terminator into the 10/100 Ethernet port
of the LYNK.
•
Do not connect a CAT5 cable from the 10/100 Ethernet port of the LYNK to
the WAN or MODEM port of a network router.
•
Turn OFF all devices before connecting cables or inserting an Edge Card.
Failure to follow these instructions can damage equipment.
▲
NOTE
•
Power electronics are not AEBus devices and should not be connected
to AEBus.
AEBus
Sol-Ark CAN
ETHERNET
ONLY
