Discount Equipment MULTIQUIP Mikasa Series, Руководство по эксплуатации

Страница: 17 / 34

MRH601DS VIBRATORY ROLLER • OPERATION MANUAL — REV. #1 (06/10/20) — PAGE 17
INSPECTION
BEFORE STARTING
Before starting the roller:
1. Read safety information at the beginning of manual.
2. Understand the geographical features and regulations
of the job site.
3. Check the items listed in Table 4:
Table 4. Inspection Points
Item Check
Parking Brake Movement
Wheel Stopper Broken
Body (Frame) Cracks, Skewness
Lifting Hook
Broken, Cracks, Loose, Bolts
and Nuts falling off
Fuel Tank Leak, Quantity of Fuel, Dirt
Fuel System Leak
Fuel Filter Dirt
Engine Oil Leak, Quantity of Oil, Dirt
Coolant Leak, Quantity of Water
Oil Tank Leak, Quantity of Oil, Dirt
Vibrator V-belt Cracks,Tension
Engine Fan Belt Cracks, Tension
Oil Pressure Pipe-Line
System
Leak, Looseness, Crack,
Abrasion
Water Pipe Line
System
Leak, Looseness, Crack,
Abrasion
Horn Operation (if working)
Headlight Operation (if working)
Traveling Lever
Broken, Cracks, Loose, Bolts
and Nuts falling off
Deadman Device Operation (if working)
Scraper Curve, Damage, Adjustment
Bolt, Nuts Looseness, Falling off
ENGINE OIL CHECK
1. To check the engine oil level, place the machine on
secure level ground with the engine stopped.
2. Remove the filler dipstick from the engine oil filler hole
(Figure 3) and wipe clean.
Figure 3. Engine Oil Level
3. Insert and then remove the dipstick again. Check that
the oil level is between the two oil level marks on the
dipstick (Figure 3).
4. If the oil level is low, fill to the edge of the oil filler hole
with the recommended oil type (Table 5). Maximum oil
capacity is 1.37 quarts (1.3 liters).
OIL FILLER
HOLE
OIL LEVEL
MARKS
Table 5. Oil Type
Season Temperature Oil Type
Summer 25°C or Higher SAE 10W-30
Spring/Fall 25°C~10°C SAE 10W-30/20
Winter 0°C or Lower SAE 10W-10
To
order
go
to
Discount-Equipment.com