Fig. 6
Audio plug
Fig. 7
Fig. 8
2.
Pull excess cable and begin tucking under backrest and seat cushion as you
work towards the rear of center glove box (armrest) as seen in
Fig. 11
Fig. 9
Fig. 10
Fig. 11
3.
Continue with pry tool/fingers to fish wire under center glove box into
storage bin.
4.
To remove storage bin
: Open center glove box and remove 2 Philips head
screws from latch cover and two more from hinge then remove the single
screw on retainer bracket.
5.
Lift to remove storage bin and set aside.
6.
Locate audio plug fed through in step 3 and
gently pull excess cable.
7.
Connect 6-pin audio cable to the 6-pin male plug from adapter
8.
Carefully route Lightning plug (See
Fig. 11
) to desired location near
dashboard, armrest etc. within 4 of center armrest (glovebox). Use caution
to not cut, pinch or crimp the cable during this step.
Fig. 11
Lightning plug
9.
Securely install plug in a location away from heat, humidity, moving parts,
or sharp metal objects.
Damage to lightning plug may occur if subject to
abuse.
