Fig. 4
Flush mounted to dash
4.
Tuck and secure any extra wire from moving parts and proceed to test
operation
B.
USB Bracket Mount
(No drilling)
1.
Locate a flat surface at location of choice within 3.2 ft. of radio to
mount USB bracket (See
Fig. 5
) to surface using adhesive/tape or
screws (included)
Fig. 5
USB mounting bracket
2.
Insert USB male terminal through hole in bracket (See
Fig. 6
)
Fig. 6
3.
Snap USB head to bracket until flush (See
Fig. 7
)
Fig. 7
5.
Connect USB Male terminal to USB adapter cable
6.
Tuck and secure any extra wire away from moving parts and test operation