Fig. 4
5.
Remove center console veneer panel (See
Fig. 5
)
Fig. 5
6.
Remove (2) Philips head screws on LH and RH side of console (See
Fig.
6
)
Fig. 6
7.
Lift radio over gear selector hub and remove from dash (See
Fig. 7
).
Fig. 7
8.
Disconnect CD Auto Changer plug from radio as seen in
Fig. 8
Fig.8
9.
Connect factory CD changer plug (from step 8) to module Female
connector (See
Fig. 9
)
Fig. 9
Module
10.
Connect module male plug to radio connector vacated in step 8
In order to avoid removing radio ground strap to fit
angled plug; audio adapter male plug (See
Fig. 9
) has
been changed from right to straight angle.
