A.
Flush to Dash or Panel
(drilling required)
1.
Drill a ¾” hole in the dash or panel using a step drill bit or equivalent
(See
Fig. 10
)
Fig. 10
Step drill bit
2.
Insert supplied 3ft. USB male terminal (See
Fig. 11
) through hole
created in step 1 and connect to module USB port (See
Fig. 12
)
Fig. 11
Flush mount 3 ft. USB cable
Fig. 12
USB port
3.
Snap USB head (See
Fig. 13
) in place and flush with mounting surface
(See
Fig. 14
)
Fig. 13
USB head
Fig. 14
Flush mounted to dash
4.
Tuck and secure any extra wire from moving parts and test operation
B.
Bracket Mount
(No drilling)
1.
Locate a flat surface at location of choice within 3.2 ft. of module and
mount USB support bracket (See
Fig. 15
) to surface using
adhesive/tape or screws (included).
