2.
Insert the 3ft. USB cable male terminal (See
Fig. 11
) through
the ¾”
hole created in step 1 and plug into USB port on Module (See
Fig. 11
)
Fig. 11
Flush mount 3 ft. USB cable
Fig. 12
Module USB port
3.
Push USB (See
Fig. 13
) until it snaps in place and flush with mounting
surface (See
Fig. 14
)
Fig. 13
Flush mount USB Terminal
Fig. 14
Flush mounted to dash
4.
Tuck and secure any extra wire from moving parts and test operation
B.
USB with Bracket Mount
(No drilling)
1.
Locate a flat surface at location of choice within 3.2 ft. of radio and
mount USB support bracket (See
Fig. 15
) to surface using
adhesive/tape or screws.
Fig. 15
USB mounting bracket
