Fig. 3
Fig. 4
5.
Connect installation harness 22-pin plug (See
Fig. 2
) to module 22-pin
connector (See
Fig. 5
)
6.
Connect push button with built-in microphone (See
Fig. 6
) to module
(MIC/CTR) input jack (See
Fig. 4
)
Fig. 5
Fig. 6
push button/Microphone
7.
Consider install location for push button/microphone. Push button
must be within reach and facing driver for voice commands and phone
dialog (cable is 6ft. long).
We recommend completing the rest of the
install prior to securing push button/mic to dashboard.
When
ready to install simply remove tape backing and secure to surface
Fig. 7
Custom installed next to traction button
Ensure no ventilation duct is pointed towards the mic.
It is best to mount button facing driver