BABY
MIDI
USB
Connect the MIDI Baby to your Mac or Windows
PC using the supplied USB cable
Launch a supported web browser (Chrome or
Opera) and navigate to
When prompted, allow your browser to access
MIDI devices
MIDI BABY
quick start
Configure and program your MIDI Baby, then
use the “Write Device” button to save your
changes
1
2
3
4
global settings
MultiJack - configures the 1/4” jack on the left side of MIDI Baby.
MIDI Tip - send MIDI on jack tip for Alexander, Empress, Meris
MIDI Ring - send MIDI on jack ring for Chase Bliss (use TRS cable)
MIDI I/O - send and receive MIDI on jack
Expression Pedal - use TRS compatible expression pedal
External Footswitch - connect 1 or 2 button foot switch
MIDI Input Channel - configures the MIDI channel MIDI Baby will receive
MIDI Thru - routes incoming MIDI from USB or MultiJack to DIN / USB / Jack
MIDI Clock - enable or disable built-in MIDI clock
USB Function - MIDI for DAW connection or configuration, HOST to connect to
Red Panda, Zoom, Source Audio C4
LED Brightness - sets maximum power for LED
LED off state - configures the LED when no button is pressed.
Blink during use only - LED is off when button is not pressed
Follow FS press - LED shows the select FS batch position
Firmware Version - displays device type and firmware version
If USB Function = HOST, hold down the footswitch while the LED is
flashing to force USB MIDI for editing
