DirekTronik 20110146, Руководство по эксплуатации

Страница: 23 / 33

23
Operating Instruction
11. WEB Control:
When the matrix is connected to the control device (such as: PC) through TCP/IP network port,
which can be controlled by Command or through GUI man-machine interactive interface.
The control mode is divided into two types:
Be connected with a single non-networked computer for single control;
Be connected to the local area network, make multi - machine control at the same time
Note: web control recommended to use Google, fire fox, IE8 above
’
s browser, using other browsers
may not be compatible
11.1. Non-networked control:
When the Matrix connect with a single non-networked computer through TCP/IP port, Matrix and
the control computer network segment are consistent. Directly connection for control; If the
network segment is inconsistent, the control computer network segment should be consistent with
the Matrix segment, but the IP address cannot be set to the same, the IP address conflict will not be
accessible
WEB:
(Default IP address of web page: 192.168.1.168
MASK: 255.255.255.0
GW: 192.168.1.1
MAC: XXX-XXX-XXXX MAC address will change with GUI module)