30
8. RS232 CONTROL
Function description: plug in the USB port to RS232 tool, double-click to open the
software
, and then enter the main interface of the software, as shown below:
Instructions:
1. All instructions begin with "#".
Instruction header c% : d---operation parameter, I---operation lock,
2. "_" means underline, indispensable.
Primary parameter d% : 0---all outputs, 1-X---specifies outputs (1-4), secondary
parameters are the same as the first
3. A space should be added between the instruction header, first-level parameters and
attribute parameters.Pleas check the instruction sheet for property parameters
Note: "/" indicates that this parameter is not used.
For RS232 command details, pls refer to the document in CD.
9 FIRMWARE UPDATE
9.1 MCU update
Open the software
UART_ISP.exe
on the PC, select the correct port and baud rate
115200, enter A1_01 (_ represents space) in the port, then select the program
(
VW22_xxx_xxx_app_xxx.bin
) in the path, and click update to complete the upgrade.
Содержание 20101782
Страница 3: ...3 MAINTENANCE 32 PRODUCT SERVICE 32 ...