We’re committed to bringing you the best in video entertainment every day. Your replacement
receiver is enclosed. Here’s how to connect and activate your new receiver, plus how to return your
non-working equipment.
To avoid non-return fees, follow important return instructions at the end of this document.
1
CONNECT YOUR REPLACEMENT GENIE MINI
·
Carefully stack your replacement receiver on top of your non-working receiver.
·
Check if your TV is high definition (HD) or standard definition (SD).
For HD: Use an HDMI cable and plug one end of the cable into the HDMI port on the receiver and
the other into the HDMI port on your TV.
For SD: Use a 10-pin mini-DIN cable and plug the black 10-pin connector into the A/V out port
on the back of your receiver and the other end(s) of the cable(s) into the corresponding colored
input ports on the back of your TV.
·
Transfer one connection at a time from the non-working receiver to the replacement receiver,
except for the power cord. Need help? Go to
.
·
Plug the power cord into the replacement receiver, then into a power outlet. If the receiver
doesn’t automatically power up, press the POWER button.
·
Turn on your TV. The CONNECTING TO VIDEO BRIDGE screen will appear.
2
RESET YOUR REMOTE
·
On the remote, press and hold MUTE and SELECT.
·
The GREEN LED will blink twice.
·
Press 9-8-7 on your remote.
·
The GREEN LED will blink four times if successful.
3
SETUP
Go to the Genie
®
HD DVR to begin setup.
·
On the remote, press MENU, select SETTINGS, then WHOLE-HOME. Select MANAGE CLIENTS
and then ADD CLIENTS.
·
Note the PIN that displays on the screen—you will need to enter the PIN on your
Genie Mini at its location.
Keeping the Genie on the ADD A CLIENT screen, go to the location where you have
Genie Minis.
When back at the Wireless Genie Mini location:
·
Wait two minutes until the CONNECT NOW label is active.
·
Verify that the Wireless Signal Strength icon displays three (3) green bars. (For troubleshooting,
go to
)
1
Connect
2
Reset
3
Setup
4
Activate
5
Program
6
Return
Wireless Genie Mini
M
ACTIVATION & EQUIPMENT
RETURN INSTRUCTIONS
(Continued on back)
Instructions can be found online at
by scanning the QR code.
Remote
Reset
2
10-pin single
end connects
to the receiver
HDMI
HDMI
Black component
cables are for video
Gray component
cables are for audio
Colored cable ends
connect to the TV
1
NETWORK
DOLBY
DIGITAL
IMAX
Wireless Genie Mini
Connecting to Video Bridge
Video Bridge Survey Mode should be active before attempting
to connect.
Video Bridge Survey Mode:
Wireless Signal Strength:
Signal Quality:
Inactive
Waiting
Connect Now
Setup Instructions
For HD
For SD
