DirectOut Technologies D.O.TEC ANDIAMO.AES, Руководство по оборудованию, Страница: 30 / 56

page 30 of 56 D.O.TEC
®
ANDIAMO.AES (SRC) Hardware Guide - Version 1.0
DirectOut Technologies
®
CHAPTER 4: Operation
© 2013 DirectOut GmbH
AES Version
level Meters - digital i/o [AEs]
All 16 AES ports have an individual display with three LEDs each.
A SYNC LED indicates the sync state for each port individually. The
clock priority follows an ascending order (port 1, port 2, ...).
sYnC (Port 1-32) lEd (green): indicates
sync status of the AEs input
LED ON = AES signal is in sync
LED blinking = AES input signal is
locked but not in sync or scaling
factor does not match.
LED OFF = no signal detected
sig (input) lEd (green): indicates
signal level of channel input
LED ON = digital input signal
equals to more than -80 dB
FS
The light intensity of the LEDs
depends on the audio level.
sig (output) lEd (green): indicates
signal level of channel output
LED ON = digital output signal
equals to more than -80 dB
FS
The light intensity of the LEDs
depends on the audio level.
If the clock source is set to AES the selection of the AES port as
clock source uses the following pattern in ascending order:
lowest input port receiving a valid AES signal
Automatic AES port selection - a change of the AES input signal
condition may result in a different clock source.