DirectOut Technologies D.O.TEC ANDIAMO.AES, Руководство по оборудованию, Страница: 22 / 56

page 22 of 56 D.O.TEC
®
ANDIAMO.AES (SRC) Hardware Guide - Version 1.0
DirectOut Technologies
®
CHAPTER 4: Operation
© 2013 DirectOut GmbH
Clocking
The system clock can be set to one of four possible clock sources
in the menu - see „CHAPTER 5: Menu Navigation“ on page 38 )
The LEDs on the front panel inform about selection and sync state
of the selected source.
AES SRC Version:
For integration of AES signals that are not in sync with the selected
system clock, AES inputs 01-16 are equipped with a sample rate
converter. These may be switched on in groups of eight channels -
see „Sample Rate Conversion [AES SRC]“ on page 41 .
int lEd (green): indicates use of internal
clock generator as clock source
LED ON = Clock source
set to internal clock generator
AEs* lEd (green): indicates use
of AEs as clock source
LED ON = Clock source set to AES input
LED blinking = Clock source set to AES and
no signal present or all SRCs switched on
wCK lEd (green): indicates use of
word clock as clock source
LED ON = Clock source set to word clock
LED blinking = Clock source
set to word clock and no signal present
LED blinking pattern = signal
locked but not in sync
75 Ω lEd (yellow): indicates the termination
status of the word clock input
LED ON = Termination active
LED OFF = Termination inactive
ANDIAMO.AES
ANDIAMO.AES SRC