![DirectOut Technologies ANDIAMO 2.AD Скачать руководство пользователя страница 18](http://html1.mh-extra.com/html/directout-technologies/andiamo-2-ad/andiamo-2-ad_hardware-manual_2507543018.webp)
page 18 of 44
D.O.TEC
®
ANDIAMO 2.AD Hardware Guide - Version 1.0
DirectOut Technologies
®
CHAPTER 4: Operation
© 2013 DirectOut GmbH
introduction
This chapter describes the basic operation of the device. Note that
throughout this manual, the abbreviation FS refers to sample rate or
sample frequency. So, when dealing with scaling factors, the follow-
ing sample rates can be written as:
•
44.1 kHz = 1 FS; 88.2 kHz = 2 FS
or
•
48 kHz = 1 FS; 96 kHz = 2 FS
The green LEDs (PSU 1 & PSU 2) indicate that a working power
supply is connected to the power supply unit. Note that an unlit LED
does not guarantee that the device is free of voltage. To ensure
that the device is completely disconnected from mains voltage, the
power chords must be disconnected.
ChAPtER 4: operation
global Control
The control on the right of the front panel indicates the power sup-
ply. Power switches are on the back panel:
Power
2 switches
Enable / disable power supply.
Psu 1 & Psu 2
2 lEds (green): indicate the status
of both power supply units
LED OFF = Power supply inactive
LED ON = Power supply active
Содержание ANDIAMO 2.AD
Страница 1: ...DirectOut Technologies D O TEC ANDIAMO 2 AD Version 1 0 Hardware Guide...
Страница 42: ...page 42 of 44 D O TEC ANDIAMO 2 AD Hardware Guide Version 1 0 DirectOut Technologies Notes 2013 DirectOut GmbH...
Страница 43: ...page 43 of 44 D O TEC ANDIAMO 2 AD Hardware Guide Version 1 0 DirectOut Technologies Notes 2013 DirectOut GmbH...
Страница 44: ......