P.16
User Guide
4. While the
button is still lit, press and hold the
button until the
remote beeps once, pause, then beeps twice.
5. Release the
button. Its LED will flash quickly.
To enter Cold Weather Mode (1-way remote):
1. Rapidly press AUX twice. The rem
ote’s LED will start flashing.
2. Press and hold
until the parking lights will flash for 2 seconds,
pause, and then flash 3 times.
To exit Cold Weather Mode, do any one of the following actions:
1. Open the hood.
2. Start the engine remotely.
3. Turn the ignition key to the
IGNITION ON (RUN)
position.
4. Press and release the
AUX
button.
5. The
button on the transmitter will light up.
6. While the
button is still lit, press and hold the
button until the
remote beeps once, pause, then beeps once again.
7. Release the
button. Its LED will flash quickly.
8. (1-way remote) Rapidly press AUX
twice. The re mote’s LED will start
flashing. Press and hold
until the parking lights flash for 2 seconds,
pause, and then flash twice.
To verify whether the system is in Cold Weather Mode:
1.
(Automatic transmissions only)
Press the brake pedal: If the
vehicle is in Cold Weather mode, the parking lights will remain
ON
while the brake pedal is pressed.
2. Do the vehicle status request feature
(page 24)
.
Extended Run Time
While the vehicle is running under a remote start, press and hold the
button
until the remote beeps. This will reset the run time counter to zero and restart the
run time cycle from the beginning.
