P.12
User Guide
To
UNLOCK
your doors and
DISARM
the system:
1. Press and hold the
button for approx. 1 sec.
2. The remote will beep twice to confirm unlocking of the doors.
Remote Trunk Release
If your system was installed with the Remote Trunk Release option, you can
open your trunk by pressing the
button until the remote beeps once. In
addition, this will also disarm the OEM-style alarm (if installed).
Idle Mode
Convenience feature:
Idle Mode allows you to keep the engine running and the
doors locked while you stop, for example, at a convenience store or for a short
delivery.
This feature allows you to let the remote starter take over control of the vehicle
(i.e. no Key in the Ignition Switch) while the engine is running.
Activating Idle mode (Automatic transmission):
1. With the engine running, make sure to release the brake pedal and
press the
,
or
button on the transmitter until the parking lights
come
ON
.
Note:
SmartStart™ can be setup to use the SmartStart™ icon to
activate Idle mode.
2. Remove the ignition key from the ignition switch.
3. The engine will continue running.
4. Exit the vehicle. All doors, the hood and trunk should be closed
5. Press the
button to lock the doors, to arm the starter kill and to
arm the alarm (if available). The engine will continue running.
a. When re-entering the vehicle, the user must reinsert the key
into the ignition and turn it to the
ON
position (not Crank)
without pressing on the brake.
b.
Once the key is in the ON position
, press on the brake pedal
to put the transmission in gear. Pressing the brake pedal at
this step will cancel the remote starter takeover.
c.
Drive off.
