P.14
User Guide
Using the TRANSMITTER (Remote Valet Mode):
1. Press the
and
buttons simultaneously until the
parking lights flash
3 times
.
2. The LED on the antenna will stay
ON
indicating that the vehicle has
successfully entered Valet mode.
To take the system out of Valet Mode
Using the KEY (Ignition Valet Mode):
1. Insert the ignition key into the ignition switch. Within 10 sec., cycle the
ignition key to the
IGNITION/RUN
and
OFF
positions 5 times until the
parking lights flash
twice
.
2. Turn the ignition
OFF
.
3. The LED on the antenna will flash rapidly, indicating that the vehicle is
now out of Valet mode.
Using the TRANSMITTER (Remote Valet Mode):
1. Press the
and
buttons simultaneously until the
parking lights flash
twice
.
2. The LED on the antenna will flash rapidly, indicating that the vehicle is
now out of Valet mode.
If someone attempted to remote-start the vehicle while in Valet Mode; the parking
lights will turn
ON
, then
OFF
, then will flash
twice
.
Panic Mode *
Note:
Panic mode can only be activated if the horn has been adequately
configured by the installer.
In an emergency situation, you can activate panic mode by pressing and holding
the
AUX
button for more than 3 seconds, until the horn starts honking. If the
vehicle is under a remote start, the engine will shut down automatically before
setting off the horn. You can stop the horn by pressing:
(this will lock your doors and deactivate panic mode)
,
or
(this will unlock your doors and deactivate panic mode).
Furthermore, the panic mode can be stopped by activating
Valet Mode
(page 13)
* Panic Mode will automatically shut down after 30 sec.
