Directed FORD5, Руководство по установке, Страница: 6 / 23

6
Directed Digital Solutions FORD5
© 2016-03-17 Directed. All rights reserved.
Wiring connections
The wiring connections listed below are specific to this firmware.
Main power harness (H1), 12-pin thick gauge connector
Conn./Pin Color Description
H1/1 White Relay 3 COM – Parking Light Output
1
H1/2 White/Brown Relay 3 N.O.– Parking Light Input
1
H1/3 Brown/Red Relay 2 N.O.– No Connection
H1/4 Yellow/Red Relay 2 COM – (+) Brake Interrupt
H1/5 Orange/Red Relay 2 N.C. – (+) Brake Interrupt
H1/6 Yellow Relay 1 COM – (+) Brake Output
H1/7 White Relay 3 COM – Parking Light Output
1
H1/8 White/Brown Relay 3 N.O.– Parking Light Input
1
H1/9 Black (-) Ground
H1/10 Red (+) 12 Volt (Battery)
H1/11 Orange/Yellow Relay 1 N.C. – No Connection
1
H1/12
Brown Relay 1 N.O.– (+) Brake Input
Auxiliary output harness (H2), 16-pin black connector
Conn./Pin Color Description
H2/1 Violet/Brown No Connection
H2/2 Yellow/Black Data TX
H2/3 Orange/Black Data RX
H2/4 Tan MS CAN Low
H2/5 Tan/Black MS CAN High
H2/6 Light Green No Connection
H2/7 Orange/Green HS CAN Low
H2/8 Orange/Brown HS CAN High
H2/9 Violet/Green No Connection
H2/10 Green/Black (-) Factory Alarm Arm
H2/11 White/Violet No Connection
2
H2/12 White/Red (+) Push-to-Start
H2/13 Lt. Blue/Black (-) Factory Alarm Disarm 2
H2/14 Green/Red No Connection
H2/15 N/A No Connection
H2/16 Violet/Yellow No Connection
1. If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed.
2. If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed. Note that they are low current and a relay
may be necessary.