manualshive.com logo in svg

Directed Directechs DB3, Руководство по установке, Страница: 19 / 22

Поделиться
Скачать
Directed Directechs DB3 Скачать руководство пользователя страница 19

19

403.NISS3HT 3.09 2009 Nissan Altima (Smart Key)
© 2020-08-12 Directed.  All rights reserved.

Feature and option list

It is recommended to configure all the features and options listed below using the configuration tool found on the module flashing
page at www.directechs.com. The web offers more options; however, manual configuration of the features is possible using the
information on this page.

* Default option

Feat.

Operation

Flashes / Option

Description

1

RFTD Output
Type

1. No RF Output* Module is connected to a remote starter using a standard installation.

2. RFTD Output

Module is connected to an XL202 using an RSR or RXT installation (when available).

3. SmartStart

Module is connected to SmartStart using an RSR or RXT installation (when available).

2

Automatic
Controlled
Door Lock

1. Disabled*

The vehicle doors will not lock automatically.

2. Ignition

The vehicle doors will lock when ignition is turned ON and unlock when ignition is
OFF.

3. Brake

The vehicle doors will lock when the brake pedal is applied and unlock when
ignition is OFF.

4. Speed

The vehicle doors will lock when speed is sensed and unlock when ignition is OFF.

3

Smart OEM
Alarm Control

1. Disabled

The OEM alarm will not be controlled by the interface upon remote start. No disarm
or arm command will be executed at the beginning or end of the sequence; it must
be controlled by the Remote Starter.

2. Safelock

Smart OEM Alarm Control will behave like a standard Safelock feature on a remote
starter. It will unlock at the beginning of the sequence, and relock after start and
shutdown.

3. Enabled*

Smart OEM Alarm Control will synchronize with the OEM alarm so that it will
disarm and rearm the vehicle in the remote start sequence, only when required.
Smart OEM Alarm Control will monitor the alarm and door lock status to detect if
the disarm or rearm is required. If the vehicle is unlocked or is not equipped with
factory alarm, the disarm/rearm will not be executed.

4

Parking Light
Control On
Data

1. Disabled

The remote starter parking lights wire must be connected in the vehicle.

2. Enabled*

The parking lights will be controlled by CAN wires.

5

OEM Security
Disarm On
Data

1. Disabled

The vehicle is not equipped with an OEM alarm.

2. Enabled*

This feature must be enabled when the vehicle is equipped with an OEM security
alarm. The alarm original to the vehicle is disarmed using the bypass and Push-to-
Start (PTS) button.

6

Door Lock
Control On
Data

1. Disabled

The remote starter door lock wires must be connected in the vehicle.

2. Enabled -
Type1 (EU)

Works for most European vehicles.

3. Enabled -
Type2 (US)*

Works for most North American vehicles. (We've noticed that some North American
vehicles need to be set to "Type 1 (EU)" to work properly.)

Содержание Directechs DB3























Отзывы:

Нет отзывов