Directed DB3 403.KIA8, Руководство по установке, Страница: 10 / 20

10
403.KIA8 1.07 2020 Kia Forte5 (Smart Key)
©2022 VOXX•DEI LLC. All rights reserved.
Module programming
Refer to “LED diagnostics and troubleshooting” for more information and for troubleshooting purposes.
For Convenience-Only programming, see next section.
1
Ensure vehicle is in a safe location and cannot move forward during programming. For vehicles
equipped with a manual transmission, make sure the gearshift lever is in the neutral position
2
The harnesses must be connected in this exact order:
Connect the 14-pin. 1.
Connect the 12-pin.
2.
Connect the 10-pin.
3.
When the LED turns on solid red, proceed with the next step.
3
Press twice (2x) on the Push-to-Start (PTS) button to turn the ignition on.
The LED will flash orange quickly.
4
The LED turns on solid green for 3 seconds, then turns off.
5
Press the PTS button once more to turn the ignition OFF.
You have successfully completed the module programming sequence.