
User Guide
P.17
AUX 2
2-way remote: If configured at installation, by default, press the Function button to select level 01
(“L-01”), then press the
button to activate
AUX 2
. Refer to the multi-level features table for
more details.
1-way remote: If configured at installation, press twice quickly on the
AUX
button, then once on the
button while the LED is slowly flashing.
Horn Chirp Timing
The pulse duration can be configured by your installer (from 5 ms to 200 ms).
Multi-car Operation
This option allows the owner of two vehicles, both equipped with the same remote starter model, to
control both systems with a single remote control.
Note:
Your remote control must be configured for second car operation by the installer.
To control the second vehicle:
Press
+
simultaneously: .................................................
LOCK
Press
+
simultaneously: .................................................
UNLOCK
Press
+ simultaneously: ..................................................
START
Press
+ simultaneously: ..................................................
STOP
Press
:............................................................
TRUNK
OR
Press
:............................................................
LOCK
Press
:............................................................
UNLOCK
Press
: .............................................................
START
Press
: .............................................................
STOP
Press
:............................................................
TRUNK
OEM-Style Alarm
The OEM-style alarm (if configured by your installer) monitors the doors, hood and ignition switch
of your vehicle. It will sound the horn if a door or the hood is opened, or if the key is turned in the
ignition.
•
To
arm
the OEM-style alarm, press the button on the transmitter.
- The OEM-style alarm will ONLY arm if the button on the transmitter is pressed.
- The LED on the antenna will flash slowly to indicate that the OEM-style alarm is now
armed.
•
To
disarm
the OEM-style alarm, press the button on the transmitter.
-
To stop the horn from sounding if the OEM-style alarm is triggered, press the
or
button, or put the system in and out of
Valet Mode
(page-12)