Directed 933.SUBARU2, Руководство по установке, Страница: 6 / 24

6
933.SUBARU2 1.38.195.3 2010 Subaru Outback
©2022 VOXX•DEI LLC. All rights reserved.
Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( ).
Wiring diagram with Key Release with T-Harness (THSUN1)
(-) Key Release Output: Brown/White
(+) Key Release 1: Orange
(-) Key Release 2: Black/Red
86 85
30
87a
87
(+) 12V
(-) Ground
1A Diode ()
86
(+) 12V
85
30
87a
87
1A Diode ()
Ignition Switch
(white connector)
Connect the black 10-pin Ignition connector to the 10-pin
connector labeled
Type 2 .
Only required for
Pit Stop mode or
manual transmission vehicles.
Hood Pin
Siren
(-) Hood Input: Gray
(+) Siren Output: Brown/Red
IGNITION
22-Pin White Connector
12-Pin Black Connector
8-Pin White Connector
THSUN1
(optional T-Harness)
Relay Pack
5A Fuse Inside
Cut the
Orange/Black
loop .
Security Only
Mandatory Connections
Remote Start Only
Legend:
Remote Start + Security
IMPORTANT:
Position the
fuses correctly!
Slide to open
MAIN (5A) (+)
(-) RLY3 PK LIGHT (15A) (+)
(-) ACC & STAR T (30A) (+)
(-) FLEX RLY (20A) (+)
IGN (20A) (+)
5
30
20
20
15
22
8
10
12
10-Pin White Connector
BIU
(right of
steering column)
BIU
(white connector)
BIU
(white connector)
BIU
(white connector)
OBDll Diagnostic
Connector
Type 1
NOT USED
Type 2
(10-pin black connector)
(+) Clutch Output: Blue/White