Directed 403.VW10 Скачать руководство пользователя страница 20

20

403.VW10 2.00 2008 Volkswagen GTI
©2022 VOXX•DEI LLC.  All rights reserved.

Quick Reference Guide (customer copy)

Vehicle takeover with keyport

1

Close the vehicle doors, hood and trunk, then send the 
Remote Start command to start the vehicle.*

14:36

Press Remote 

Start button*

2

Send the Unlock command on the factory or aftermarket 
remote.*

14:36

Press Unlock on 

either remote*

3

Enter the vehicle, while making sure the key fob is inside 
with you.

START

Key OUT

ON

OFF

START

Key IN

ON

OFF

START

Key IN

ON

OFF

START

Key IN

ON

OFF

Enter

vehicle

&

4

Insert the key into the key port without pressing all the 
way.

Note: If you press all the way, the vehicle will turn off. 

Insert Key

5

Depress the brake pedal, put the car in gear and drive 
off.

Ready to 

drive off

* Icon and remote appearance may differ depending on the model purchased.

Note:

 If the brake is not pressed with 45 seconds after the unlock, takeover with be

unavailable. If the takeover is unavailable, the vehicle will shut off the engine whendoor
is opened.

Sending commands to your vehicle

Whether you want to remote start the engine, lock/unlock the doors or pop the trunk, there are 
3 possible ways you can send commands to your vehicle, using the:
•  Factory remote.
•  Aftermarket remote.
•  Directed SmartStart application via your smartphone.

If applicable, you can also start the engine remotely by pressing the Lock button 3 times quickly 
on your factory remote.

Vehicle takeover with regular key

1

Close the vehicle doors, hood and trunk, then send the 
Remote Start command to start the vehicle.*

14:36

Press Remote 

Start button*

2

Send the Unlock command on the factory or aftermarket 
remote.*

14:36

Press Unlock on 

either remote*

3

Enter the vehicle, insert your key in the ignition barrel, and 
turn it to the ON position.

START

Key OUT

ON

OFF

START

Key IN

ON

OFF

START

Key IN

ON

OFF

START

Key IN

ON

OFF

Enter

vehicle

&

4

Depress the brake pedal, put the car in gear and drive off.

Ready 

to drive 

off

* Icon and remote appearance may differ depending on the model purchased.

Содержание 403.VW10






















Отзывы: