12
403.TL4 4.00 2012 Lexus IS 350C (Smart Key)
© 2019-05-31 Directed. All rights reserved.
Module programming
Key-type vehicles
1
Wait
until the LED turns ON solid red.
Note:
To skip the transponder programming and use convenience features only, press
the programming button 5 times. When the LED turns ON solid orange, proceed to
step 2.
2
Insert
and
turn
the key to the ON position. The LED starts flashing green after
approximately 5 seconds.
3
Start
the vehicle.
4
The LED turns ON solid for 3 seconds:
Orange: The bypass has successfully programed
WITHOUT
statuses.
-
Green: The bypass has successfully programed
WITH
statuses.
-
Turn
the ignition OFF and
remove
the key.
You have successfully completed the module programming sequence.
Push-to-Start (PTS) vehicles
1
Wait
until the LED turns ON solid red.
Note:
To skip the transponder programming and use convenience features only, press
the programming button 5 times. When the LED turns ON solid orange, proceed to
step 2.
2
Important!
Do NOT depress the brake pedal.
With the key inside the vehicle,
press
the Push-to-Start (PTS) button twice to turn the
ignition ON.
The LED will start flashing green.
3
Apply
the brakes and
press
on the Push-to-Start (PTS) button once to start the engine.
4
The LED turns ON solid for 3 seconds:
Orange: The bypass has successfully programed
WITHOUT
statuses.
-
Green: The bypass has successfully programed
WITH
statuses.
-
Press
the PTS button once more to turn the ignition OFF.
You have successfully completed the module programming sequence.