11
403.TL10 2.29 2017 Toyota Camry (H Key)
©2022 VOXX•DEI LLC. All rights reserved.
Connecting the module
Important!
Make all the required connections to the vehicle, as described in this guide, and double check to ensure everything is correct prior
to moving onto programming.
Warning!
To take advantage of advanced features, you must use DirectLink 4.5 (and higher) or the Directechs Mobile application.
Flashing a module using your computer:
1.
Connect
the interface module to your computer using the
XKLoader2
.
2.
Go
to www.directechs.com using Internet Explorer, and
select
the Flash Module button.
3.
Follow
the instructions to
select
your vehicle, installation type, and configure your options.
4. Once you have configured the firmware options,
click
on the FLASH button.
Flashing a module using your smartphone or tablet:
1.
Connect
the interface module to your
XKLoader3
.
2.
Launch
the Directechs Mobile app on your smartphone or tablet.
3.
Select
FLASH YOUR MODULE and
follow
the on screen instructions.
When the flashing operation is successful, you can proceed with the instructions below.
D2D installation
Recommended:
Connect
the 10-pin, 12-pin and 14-pin harnesses to the module, then
connect
the 4-pin D2D harness.
3
rd
(14-pin)
1
st
(10-pin)
4
th
(D2D)
2
nd
(12-pin)
OR
W2W installation
If required:
Connect
the 10-pin and 12-pin harnesses to the module, then
connect
the 14-pin
harness to the module.
3
rd
(14-pin)
1
st
(10-pin)
2
nd
(12-pin)