5
403.NISS4HT 2.39 2016 Nissan Versa (Smart Key)
©2022 VOXX•DEI LLC. All rights reserved.
Pre-installation and application warnings
Firmware notes:
This section highlights important information for this specific firmware and will assist in
pricing accordingly, as well as bringing awareness to any operational or vehicle limitations.
T-Harness
compatible
THNISS3D
Keys required for
programming
1
Keys required for
operation
0
IMPORTANT!
If “Headlight System Error” appears on cluster, disable Parking Light through Data and connect the parking light wire to
vehicle. Refer to “Vehicle Connections” for additional details.
When armed, the aftermarket alarm (if available) will sound if the trunk is opened using the OEM passive entry request button near the
trunk. To avoid this, open the trunk using the OEM fob button, aftermarket transmitter or SmartStart application. Alternately, you can disarm
the aftermarket alarm before opening the trunk.
Important!
RSR installations are
NOT
compatible with vehicles equipped with a manual transmission.
Remote Start Ready (RSR) is a function that enables the interface module to remote start the vehicle completely on its own. Consequently,
there is no need for an aftermarket or an OEM remote starter in order to start the vehicle from a distance.
SmartStart Compatible: SmartStart is equipped with D2D, which means it can be connected to an interface module and used in Remote
Start Ready (RSR) mode without the use of a remote starter. See "Module programming" for more information.
The optional Plug & Play
THNISS3D
T-Harness is sold separately.
The OBDII Diagnostic Connector features will remain the same even when the T-Harness is installed.
Unless specified otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic connector.
Refer to the "Vehicle connections" following the installation diagram.
General notes:
This section highlights important information for this specific firmware.
[1]
The lock, unlock and parking light wires are optional connections,
ONLY
required if features “OEM Security Disarm on Data” & “Door Lock
Control On Data” are disabled. Refer to "Feature & Option List" for more information.