background image

18

©

2000 Directed Electronics, Inc.

LED:

A red light mounted at a discretionary location inside the

vehicle. It is used to indicate the status of your system. 

Transmitter:

A hand-held, remote control which operates the var-

ious functions of your system. 

Valet

®

Switch:

A small push button mounted at a discretionary

location inside the vehicle. It is used to override the optional

Failsafe

®

Starter Kill when a transmitter is lost or damaged, or to

enter or exit Valet

®

Mode.

Convenience Expansions 

Listed below are some of the many expansion options available for

use with your system. Some options may require additional parts

and/or labor. Please consult with your dealer for a complete list of

options available for use with this system.

Domelight Supervision:

The domelight will illuminate for 30

seconds each time the system is disarmed using the transmitter.

This is useful for seeing inside the vehicle at night prior to

entering it. 

Power Door Lock Control:

Your system is capable of controlling

many types of power door lock systems; however, some door lock

systems may require extra parts. Consult with your dealer to deter-

mine which type of locks your vehicle uses. If power locks are

Содержание Avital 3200


























Отзывы: