Type 10
Refer to "Pre-installation and application warnings" on page 4 for important information, such as the description of special notes referenced in the diagram (
).
Note: program
for double pulse
when flashing.
HS CAN Low: Tan: 4
HS CAN High: Tan/Black: 5
10: Red: (+) 12V Input
(-) Trunk Release Output: Red/White: 9
9: Black: (-) Ground
The Remote Start
Safety Override
Switch MUST be in
the ON position.
Remote Start Safety
Override Switch
(-) Unlock Output: Dark Blue: 7
(-) Lock Output: Dark Green: 15
Siren
Hood Pin
Refer to the Vehicle
wiring reference chart.
(-) Hood Input: Gray: 3
(+) Siren Output: Brown: 17
(-) Parking Light Output: Green/Black: 10
7 White
4 White
8 thick-gauge wir
es
MC501
16
8
9
1
C-CAN High: pin 6
C-CAN Low: pin 14
OBDII Diagnostic
(connector side view)
EMS COM:
Yellow/Orange, pin 21
(-) Disarm Output: Lt. Blue/Black: 13
EM31
(white 33-pin connector in driver’s kick panel)
23
21
Cut
11: Orange/Yellow:
Immobilizer Data Interrupt
(connector side)
6: Yellow:
Immobilizer Data Interrupt
(vehicle side)
Immobilizer Data Interrupt (connector side):
Orange/Black: 3
Immobilizer Data Interrupt (vehicle side):
Yellow/Black: 2
(+) Brake Input: Brown/White: 16
(+) Ignition Output:
Pink
(+) 12V Input: Red
(+) Accessory:
White orOrange,
pin 3
(+) Starter:
Black/Yellow
or White,
pin 1
(+) 12V: Black, pin 5
(+) Ignition:
White/Blue or Blue,
pin 6
(+) Accessory Output:
Orange
(+) 12V Input: Red
(+) Starter Output
(to starter): Violet
Starter Input (from
key switch): Green
Ignition Switch
(6-pin connector)
C-CAN wires MUST be
connected for proper
operation.
37
Directed Digital Solutions HKHT1
© 2020-03-03 Directed. All rights reserved.