Type 2
Refer to "Pre-installation and application warnings" on page 4 for important information, such as the description of special notes referenced in the diagram (
).
16
8
9
1
Ignition Switch
(white 6-pin connector)
HS CAN Low: Tan: 4
HS CAN High: Tan/Black: 5
10: Red: (+) 12V Input
7 White
4 White
8 thick-gauge wir
es
MC501
(-) RAP Off Output: White/Violet: 11
(+) Brake Input: Brown/White: 16
9: Black: (-) Ground
Siren
Hood Pin
C-CAN High: pin 6
C-CAN Low: pin 14
OBDII Diagnostic
(connector side view)
(+) Ignition Output:
Pink
(+) 12V Input: Red
(+) 12V: Green,
pin 5
(+) Ignition: Pink, pin 6
(+) Accessory
Orange,
pin 3
(+) Starter
White,
pin 1
(+) Accessory Output:
Orange
(+) 12V Input: Red
(+) Starter Output
(to starter): Violet
The Remote Start
Safety Override
Switch MUST be in
the ON position.
Remote Start Safety
Override Switch
(-) Unlock Output: Dark Blue: 7
(-) Lock Output: Dark Green: 15
11: Orange/Yellow:
Immobilizer Data Interrupt
(connector side)
6: Yellow:
Immobilizer Data Interrupt
(vehicle side)
Immobilizer Data Interrupt (connector side): Orange/Black: 3
Immobilizer Data Interrupt (vehicle side): Yellow/Black: 2
Refer to the Vehicle
wiring reference charts
for pin, wire and
connector details
(-) Hood Input: Gray: 3
(+) Siren Output: Brown: 17
Starter Input (from
key switch): Green
(-) Parking Light Output: Green/Black: 10
(-) Disarm Output: Lt. Blue/Black: 13
Note: program
for double
pulse when
flashing.
OR
2 - EM01, Gray 39-pin connector
15
15
1 - EM01, Black or Blue 39-pin connector
Connector
The EMS COM connections are only needed
if the vehicle has a transponder/immobilizer.
Cut
Refer to the Vehicle wiring reference chart for
the connector, pin and wire color for your specific vehicle.
11
Directed Digital Solutions HKHT1
© 2020-03-03 Directed. All rights reserved.
