9
403.FORD18 1.06 2021 Lincoln Nautilus (Smart Key)
©2022 VOXX•DEI LLC. All rights reserved.
Module programming
For
Convenience-Only
programming, see next section.
1
Ensure vehicle is in a safe location and cannot move forward during programming.
2
The harnesses must be connected in this exact order:
1. Connect the 14-pin.
2. Connect the 12-pin.
3. Connect the 10-pin.
When the LED turns ON solid red, proceed with the next step.
3
Press the Push-to-Start (PTS) button once (1) to turn the ignition ON.
If Tan & Tan/Black CAN wires are connected, the LED will flash orange then turn solid
green for 3 seconds then turn OFF.
-
If the Tan & Tan/Black CAN wires are not connected, the LED will flash orange up to 15
seconds, then flash green, orange, green and then turn off.
-
4
Press the PTS button once (1) more to turn the ignition OFF.
You have successfully completed the module programming sequence.