(4)
(5)
(1)
(2)
(3)
y
Cameras
Dire
ct
M
PE10
33COV
Megapixel Covert
Digital Camera
Quick Guide
5. Setting Video Signal System
6. Camera Calibration
MAIN MENU
SD
STORAGE
SD
STORAGE
PAGE
0001/0009
Settings
ESC
ESC
SD
STORAGE
PAGE
0001/0009
Settings
ESC
ESC
ESC
ESC
NEST
PAL
Digital CMOS Setting
Digital CMOS Setting PAL
SD
STORAGE
PAGE
0001/0009
Settings
ESC
ESC
Digital CMOS Setting PAL
(1)
(3)
(2)
(4)
1. Press “Setting”
on
the
Main Menu.
2. Drag the Setting Menu down to select “Digital CMOS Setting”.
3.
S
elect either PAL or NTSC based on
you
r country’s
video signal system.
4. After
making your
selection, press “Digital CMOS Setting” again to
complete the setting.
1. Press “Setting” o
n
the
Main Menu.
2. Drag the Setting Menu down to select “Digital CMOS Calibration”.
3. After
making your selection
, “Calibrating”
will appear
on the screen.
4.
When
calibration is complete, “Cable Disconnect”
will appear on the screen
.
5. Unplug
the
cable to complete calibration.
SD
STORAGE
PAGE
0001/0009
Settings
ESC
ESC
Digital CMOS Setting PAL
SD
STORAGE
PAGE
0001/0009
Settings
ESC
ESC
ESC
ESC
NEST
PAL
Digital CMOS Setting
7.
C
hange Covert Lens Cap
SD
STORAGE
PAGE
0001/0009
Settings
ESC
ESC
Digital CMOS Calibration
PAGE
0001/0009
Settings
Calibrating
Cable Disconnect
MAIN MENU
SD
STORAGE
(1)
(3)
(2)
(4)
1.
Remov
e the lens cap
fr
o
m the
camera,
and the desired lens cap
from the set,
by unscrewing them (rotate
counterclockwise
)
.
2. Place the
desired
lens
cap
onto
the
camera.
3. Screw
the desired lens cap onto the camera (rotate
clockwise
) until it is secure
.
V1.0
2. Package Content
1. Name and Parts
3. Camera Setup Illustration
WDR Digital Camera Lens Cap
Image Refine Connector
Camera to Connector Cable
Connector to DVR Cable
Extension Microphone
1
2 3
4 5
6 7
8
1. Camera Lens
5. HDMI Socket of Connector
2. HDMI Socket of Camera
6. Extension Mic Socket
3. HDMI Jack of Cable
7. Built-in Microphone
4. HDMI Jack of Cable
8. HDMI Socket of Connector
Back View of
Image Refine
Connector
1. Connect camera to connector
using required cable.
2. Plug-in extension microphone
to proper socket of the connector.
3. Connect connector to portable DVR
using required cable.
Note: It is required to calibrate camera
and configure video signal system
after connection of all parts is established.
Microphone
Camera
Connector
Portable DVR
Extension Microphone
Connection of all Components
4. Lens Cap On
1. Collect the black lens cap from the screw pack.
2. Place on top of the camera lens.
3. Press “Power” button to turn power of PV-500EVO on.
4. Then follow the steps described on next page to start
camera calibration.
Covert Lens
Cap
80x120mm
80x120mm
All manuals and user guides at all-guides.com
all-guides.com
