Thank you for purchasing a Direct Supply
®
Attendant
®
Pen Light from Direct Supply Equipment & Furnishings
®
. Please
read this entire guide carefully and keep it for future reference. This guide will provide you with instructions, warnings,
warranty information and other important information about your Direct Supply Attendant Pen Light. Share this
information with your housekeeping, nursing and maintenance staff to help ensure the Pen Light is used and cared for
properly. Please keep and refer to this Owner’s Manual.
Definitions and Symbols
•
Attention. Read the instructions.
CAUTION: Indicates correct operating or maintenance procedures in order to prevent damage to or destruction of the
equipment or other property
WARNING: Calls attention to a potential danger that requires correct procedures or practices in order to prevent
personal injury.
DEVICE: Your Direct Supply Attendant Pen Light
YOU and YOUR: The facility, community or other entity that has purchased the device.
WE, US and OUR: Direct Supply Manufacturing, Inc.
Product Description
The Direct Supply Attendant Pen Light can be used by a caregiver to quickly and conveniently illuminate an area while
performing their daily tasks. This Pen Light provides consistent light intensity and a user-friendly pocket clip.
Directions for Use
Upon receipt of the product, inspect the product for damage. If the product is damaged or the wrong product
was accidentally sent, DO NOT USE IT and immediately contact Direct Supply Equipment & Furnishings for
further instruction.
Before each use, verify the product is undamaged and properly functioning. Do not use the product if you suspect it
may be functioning incorrectly.
• Installing the batteries: Open the battery compartment by turning the lamp housing counter-clockwise (while the
lamp faces toward you).
• Slide two AAA batteries into the compartment. Ensure the batteries are inserted correctly (positive end towards
the lamp).
• Close the battery compartment by turning the lamp housing clockwise (while the lamp faces toward you).
• When the batteries are installed, the product is ready to use. To illuminate the lamp, press the tip of the pocket clip
until it touches the main body of the pen light. The lamp will remain illuminated until the pressure on the pocket
clip is released.
• To clean the pen light, wipe it with a soft, damp cloth.
1-800-634-7328
■
directsupply.com
Please keep and refer to this Owner’s Manual.
Direct Supply
®
Attendant
®
Pen Light
Owner’s Manual
AAA batteries
ON/OFF switch
lamp/tip assembly
main body
