manualshive.com logo in svg

Diplomat ADEPT DA 130, Инструкция по эксплуатации

Поделиться
Скачать
Diplomat ADEPT DA 130 Скачать руководство пользователя страница 15

INSTRUCTIONS FOR USE                                                 

 

 

 

                    DA 170, DA 130 

UM_EN_DA170_DA130_2018-09_ver2.6                         

                                                                                                   15

 / 

37

 

Rinsing position 

Moving to rinsing position:  

Press the button => 1x beep & chair moves to the rinsing position & bowl is rinsed & cup is filled 

Returning from rinsing position: 

Keep pressed the button in time interval from 0,6 seconds to 2 secs =>

  

2x beep & chair returns to its previous position & again bowl is rinsed. Cup filling is disabled.

 

Activating/Deactivating function of cup filling:  

Press the button in interval from 2 secs to 4 secs (triple beep). 

Activating/Deactivating function of bowl rinse: 

 

Press the button in interval from 4 secs do 6 secs (beeper beeps 4 times). 

Programming of chair rinsing position:  

see chapter 8.6.3 Chair Programming. 
 

8.1.2 Saving the customized settings 

By pressing the instrument illumination button 

 while all the instruments are in their basic positions, the set values 

of the parameters of the instruments are saved in the internal memory of the unit and are read at starting the unit. 
Saving of the parameters is indicated by triple beep. The unit remembers the set parameters even after it has been 
turned off. 

 

8.1.3 Adjusting flow intensity of cooling water 

Use the needle valve on the right bottom side of the control panel to control a water coolant flow.  
An individual water coolant flow control for each handpiece is available upon request. In this case, the needle valve is 
located on the bottom of a control panel directly under the handpiece. 

 

 

8.1.4 Tray table 

A tray table with a holder for a unit with upper delivery system (DA170) is available upon request.  
Stainless plate with open corners is either available upon request. Its dimensions are: 181 mm x 280 mm or in a case 
when dentist’s control panel is equipped with mechanical brake, it is possible to deliver bigger size plate with 
dimensions:  290 x 370 mm. 
 

                              

       

 
Models with hanging hoses (DA 130) are included in standard delivery with stainless plates with dimensions 140 x 260 
mm for dentist’s control panel.  Upon order this unit can be equipped with double-plate where each plate has 
dimensions 177 x 239 mm, together it is 354 x 239 mm.  
 
The size of both stainless tray table models allows placing „Mini Tray“ - type plastic  
dishes (dimensions: 162 x 238 x 22,2 mm) by „ZIRC Color Code System“ on them.  
 
 

Содержание ADEPT DA 130






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды