INSTRUCTIONS FOR USE
DA 170, DA 130
UM_EN_DA170_DA130_2018-09_ver2.6
31
/
37
10.7 Decontaminating the cuspidor bowl
1. It is recommended to use SAVO Prim cleaning agent, if the dental unit is configured with saliva ejector only.
Decontamination of the cuspidor bowl should be performed at least once a day (e.g. after finishing the work). Pour
at least 200ml of a 1% SAVO Prim solution into the cuspidor bowl.
2.
It is required to use PULI - JET PLUS cleaning agent, if the unit is configured with an aspirator and Cattani
separator. Use at least 200ml. of a 0,8% solution to clean the cuspidor bowl.
Cattani disinfecting anti-foaming tablets for dental aspirators. Instructions for Use
Even if the unit is regularly and properly cleaned, blood and mucus under negative pressure create a great amount of
foam anyway. This may result in frequent undesired abruption of suction.
Simply place the tablet (do not remove the protective dissolvable film, that ensures safe keeping and handling, even
though the product is not classified as dangerous) in the filter of the tip and suck in the small amount of water through it
for immediate antifoaming effect. When placing the tablet in very small slots, protective film should be removed (wear
suitable gloves) and the pill broken in two parts (press along the marked line) to allow insertion of the two halves into the
filter system. As the liquid passes through the tablet will release disinfecting and anti-foaming agents for the whole working
day.
High efficiency is enabled by ortho-ftalaldehyde as the active disinfecting component. Its efficiency has been proven by
the official tests for Staphylococcus aureus, Pseudomonas aeruginosa, Enterococcus hirae and Candida Albicans.
Internal disinfection of the suction system and sucked-off debris is combined with the anti-foaming effect for safe and
odour-free system operation. According to the CE I c
lassification, this product is classified as a „medical substance".
PULI
– JET PLUS cleaning agent.
PULI
– JET PLUS is a non-foaming aldehyde-free concentrate used for disinfection, deodorizing, cleaning and
maintaining dental aspirators of all types (semi-wet, wet, dry). It is recommended to disinfect the suction system at the
end of each working day and clean it at least once in the middle of the day. PULI
– JET PLUS leaves a residue on the
inside of the pipes to prevent the accumulation of bacterial growth. PULI
– JET PLUS is certified as germ-killer,
fungicidal and antiviral agent. It is generally recommended to improve and refine the quality of disinfecting procedures
to minimize the contamination risk.
Instructions for use
How to fill the doser: place the bottle in the vertical position, preferable on a flat surface. Unscrew the lid and fill the
doser to the edge by squeezing the bottle gently at the points marked with two labels (take care not to overfill it).
Release the pressure: excessive amount of the liquid returns back to the bottle while the exact amount (10ml) of the
concentrate remains in the doser. Concentrated PULI
– JET PLUS after dilution to 0,8% cleans and disinfects, to 0,4%
it is only sanitary cleaning agent. Free sample of concentrated Puli-Jet PLUS (10 ml) equals to the content of one
doser. 1,25l disinfecting and 2,5l sanitary solution can be prepared out of it. For cleaning and disinfection dilute two
doses of the doser (two free samples) in 2,5l of warm water (50°C) and suck 1l with big aspirator and 1l with small
aspirator and pour 0,5l into the bowl. For the very cleaning of the system dilute one dose of the doser (one free
sample). Do not rinse, proteolytic and disinfecting effect of PULI
– JET PLUS reveals with time.
Useful notes
Puli-Jet PLUS is supplied commercially in 1 liter bottles: out of 1 liter of Puli-Jet PLUS concentrate you will prepare 250
litres of sanitary solution or 125 litres of disinfecting solution. Puli-Jet PLUS enables you to save on transport cost (70
%), the dispensive nozzle fitted in the lid, 1-litre bottle is easy to handle and it is not graduated. We recommend Puli-Jet
PLUS as, when used regularly, it contributes to good maintenance of the aspirator by keeping it clean and protecting it
against corrosion and wearing.
