Diphano ALEXA 410 Скачать руководство пользователя страница 1

1/4

INSTRUCTION PAPER 

ALEXA 410-412 | Round dining table 148R

1x base

4x bolt M6x20mm

1x pole

4x washer M6

1x hex key 4mm

4x spring washer M6

Start by unpacking everything carefully. Make sure to cover the floor to prevent any damage or scratching (you can use the cardboard box for this). 

 CONTENT

A

B

G

H

I

J

4x bolt M8x25mm

1x hex key 5mm

4x washer M8

4x spring washer M8

D

C

E

F

COMPONENTS TO FIXATE BASE:

COMPONENTS TO FIXATE TABLE TOP/ALU SUPPORT:

STEP 1: CONNECT THE POLE TO THE BASE 

STEP 2: TURN THE BASE + POLE

C

D

E

F

Use the hex key (C) to assemble the aluminium pole (B) onto the 
base (A) as shown in the picture. Make sure you follow the correct 
order as indicated by the letters in the picture. 

Turn the base with the pole carefully to its normal position with at 
least 2 persons.

BOTTOM 

BASE

BOTTOM 

BASE

ASSEMBLY INSTRUCTIONS BASE + POLE

Содержание ALEXA 410

Страница 1: ...8x25mm 1x hex key 5mm 4x washer M8 4x spring washer M8 D C E F COMPONENTS TO FIXATE BASE COMPONENTS TO FIXATE TABLE TOP ALU SUPPORT STEP 1 CONNECT THE POLE TO THE BASE STEP 2 TURN THE BASE POLE C D E F Use the hex key C to assemble the aluminium pole B onto the base A as shown in the picture Make sure you follow the correct order as indicated by the letters in the picture Turn the base with the po...

Страница 2: ...op K onto the pole B so the pre made holes match Now use the hex key G to fixate the table top K onto the pole B Make sure you follow the correct order as indicated by the letters in the picture Check with a spirit level if the table is placed level If not un screw the adjustable feet till your table is completely level 1x teak table top K EXTRA COMPONENTS FOR TEAK TABLE TOP ...

Страница 3: ...order as indica ted by the letters in the picture Carefully place the ceramic table top N onto the alu support with minimal 4 persons Place the bumpers O on the correct positions as shown in the picture Check during setup if your ceramic table top N is placed stable onto the alu support M If not you can add plastic washers P on the necessary postions Check with a spirit level if the table is place...

Страница 4: ...LOUNGER ROPE ARMCHAIR ASSEMBLY INSTRUCTIONS TRESPA TABLE TOP STEP 1 SECURE TABLE TOP STEP 2 ADJUST FEET G H I J Carefully place the table top L onto the pole B so the pre made holes match Now use the hex key G to fixate the table top L onto the pole B Make sure you follow the correct order as indicated by the letters in the picture Check with a spirit level if the table is placed level If not un s...

Отзывы: