Diono Radian R120, Инструкции по эксплуатации

Страница: 34 / 64

Rea
r-
F
a
c
in
g
I
n
st
a
lla
ti
o
n
34
Place car seat so that both
the seat bottom and feet
of the detachable base are
fl at on the vehicle seat.
Front of car seat should
be up against back of
vehicle seat.
WARNING:
• You must use car seat rear-facing if child is less than
1 year and weighs less than 20 pounds (minimum
requirements).
• Diono and the American Academy of Pediatrics
recommend keeping children rear-facing to the
maximum rear-facing weight or height capacities of
this car seat (45 pounds or head is less than 1.5
inches from top of shell).
• Consult your pediatrician for the correct angle for
newborns and children without head control.
• Read vehicle manual to learn more about top tether
anchors, air bags, seating positions, warnings, and
how a vehicle seat belt locks.
• Detachable base MUST be used with this car seat
when it is rear-facing (See page 31 for detachable
base installation).
• Make sure the bottom of the seat completely
contacts the vehicle seat with no overhang.
For step-by-step installation videos,
please visit: www.youtube.com/DionoUSA
Important: Detachable base MUST be used with this car seat
when it is rear-facing ( See page 31 for detachable base
installation ).
1.
Infant Support Cushion: You may use the cushions up to any
weight for maximum comfort and support.
Important: It may be necessary to move front vehicle seat
slightly forward to properly fi t rear-facing car seat. The Diono
Angle Adjuster may be purchased separately to adjust recline,
if child can sit up unassisted and has full head control. Angle
Adjuster is not appropriate for a newborn.
❒
See final checklist on page 52
Rear-facing Lap-Shoulder Belt Installation
Rear-facing SuperLATCH™ Installation (cont.)