Dionex UltiMate 3000 Series, Руководство по эксплуатации

Страница: 46 / 236

UltiMate 3000 Series:
SD, RS, and BM Pumps
Page 32 Operating Instructions
3.5 Setting Up the Pump in Chromeleon
This section provides brief instructions for setting up the pump in Chromeleon. For details,
see the Chromeleon Help.
Tip: When the pump is connected to the Chromeleon computer, verify that the
Chromeleon software is installed
before turning on the pump power for the
first time. Only then, the Windows
®
operating system will detect the pump
automatically when the pump power is turned on.
3.5.1 Loading the USB Driver for the Pump
1. Turn on the computer power, if it is not already on.
2. Under the Windows
®
operating system (Vista™, XP, 7, or Server 2008), log on as a

local administrator if the computer is a local computer.

user with local computer administrator privileges if the computer is a network
computer.
3. Open the Chromeleon Server Monitor program by double-clicking the Chromeleon
Server Monitor icon on the Windows taskbar.
If the Server Monitor icon is not on the taskbar, click Start on the taskbar, point to
Programs (or All Programs , depending on the operating system), point to Chromeleon,
and then click Server Monitor .
4. Click Start to start the server.
5. Click Close to close the Server Monitor window. The Server Monitor icon appears
on the taskbar.
Tip: Clicking the Quit Monitor button quits (exits) the Server Monitor
program, but does not stop the server. To stop the server, click Stop .
6. Turn on the main power switch on the rear panel of the pump.
7. Depends on the operating system
Windows
®
Vista™, Windows
®
7, and Windows
®
Server 2008
will automatically detect the new pump and perform the USB installation. If Windows
fails to detect the pump and launches a wizard instead, this indicates that you connected
the pump to the computer and turned on the power for the first time
before you installed
Chromeleon.