Dionex ICS-3000, Руководство оператора

Страница: 171 / 392

Doc. 065031-04 1/08
155
DC Shutdown
6.3 Consumables Storage
The columns, suppressors, and other consumable items used with an ICS-3000
system have various short- and long-term storage requirements. Refer to the
manuals for the individual products for instructions. These manuals are provided
on the Dionex Reference Library CD-ROM (P/N 053891).
6.4 Amperometry Cell Storage
6.4.1 Short-term Storage of the Amperometry Cell
If the cell will not be used for a short period of time (less than 2 days),
disconnect the tubing from the inlet and outlet fittings and install fitting
plugs.
NOTE If the reference electrode remains in the cell but
eluent is not being pumped through the cell, the
reference electrode frit may partially dry out. If this
occurs, regenerate the electrode by soaking it in a
solution containing 1 M KCl and 1 M HCl.
6.4.2 Long-term Storage of the Amperometry Cell
If the cell will not be used for 2 days or more, remove the pH reference
electrode and store it in a solution of saturated KCl, as instructed in the
procedure below.
1. Prepare a saturated solution of KCl in ASTM filtered, Type I
(18 megohm-cm) deionized water.
2. Locate the cap in which the electrode was shipped and fill it two-
thirds full with the prepared KCl solution.
3. Remove the pH reference electrode from the cell.