Dionex ASE 150, Руководство оператора

Страница: 131 / 176

B • Installation
Doc. 065207-02 9/08
123
bottle holder (see Figure B-13 ). If you are using a 250-mL collection
bottle, place the bottle directly on the collection bottle holder.
3. Toggle the needle switch to the
DOWN
position.
4. Close the door.
5. Press
RINSE
to begin the rinse cycle. The LED on the
RINSE
button
turns on and will remain lighted while the rinse cycle is in progress.
6. When the rinse cycle is complete (after about 1 minute), three beeps
are emitted and the
RINSE
button LED turns off.
7. Remove the rinse cell:
a. If the oven is hot, put on the thermal gloves (P/N 060372)
provided in the ASE 150 Ship Kit (P/N 066399).
b. Remove the rinse cell from the cell holder, and place it on the cell
rack (P/N 059927) to cool.
c. Close the cell door until the next run, to save energy and prevent
anyone from accidentally touching a hot surface.
8. Remove the collection vessel used for the rinse cycle.