Dionex ASE 150, Руководство оператора, Страница: 127 / 176

B • Installation
Doc. 065207-02 9/08
119
Parameter Description
METHOD Specifies the name or number of the method to run.
CELL SIZE Specifies which sample cell is installed (1 mL, 5 mL,
10 mL, 22 mL, 34 mL, 66 mL, or 100 mL). This setting
determines solvent volumes and temperature settings.
UNITS Selects the unit of measure for pressure displays (psi,
MPa, bar, or atm).
REDUCE RELIEF Determines whether the pressure relief valve is open
for a reduced period (
ON
) or the normal period (
OFF
).
When the pressure relief valve is open, residual
pressure is released from the sample cell. The default
setting (
OFF
) is recommended.
PREHEAT TIME Specifies for how long the oven heats up without
solvent (0 to 99 minutes). The default setting (
0
) is
recommended.
PREHEAT PURGE Enables and disables purging of the cell (without
solvent) during the preheat period. The default setting
(
OFF
) is recommended.
BYPASS HEAT-UP Specifies whether to bypass the heat-up period for the
sample cell. The default setting (
OFF
) is recommended.
KEY SOUND Determines whether a beep is emitted when a keypad
button is pushed.
ERROR SOUND Determines whether a beep is emitted when an error
occurs (for example, you press the wrong keypad
button).
Table B-1. System Setup Parameters