Dionex ASE 150, Руководство оператора

Страница: 126 / 176

ASE 150 Operator’s Manual
118
Doc. 065207-02 9/08
B.2.9 Selecting Setup Options
1. On the
MENU
screen, press an arrow button to move the cursor to
SETUP
, and then press
ENTER
to display the
SETUP
screen (see
Figure B-9 ). All parameters do not fit on one screen. To view
additional parameters, press the down arrow button.
2. Specify the method to run, the sample cell size, and other ASE 150
operating parameters. Table B-1 describes each setup parameter.
3. To change a setting:
a. Press an arrow button to move the cursor to the first parameter
that you want to change (for example,
CELL SIZE
).
b. Press
ENTER
. The cursor moves to the editing field.
NOTE If you decide not to edit this field, press
MENU
to return the cursor to the left margin of the
screen.
c. Press an arrow button to step through the values allowed for the
highlighted value. (Pressing and holding the arrow button steps
through the values more rapidly.) When the required value is
displayed, press
ENTER
.
Figure B-9. Setup Screen (All Parameters Shown)
METHOD
CELL SIZE
UNITS
OFF
PSI
100ML
PCB
REDUCE RELIEF
PREHEAT TIME
PREHEAT PURGE
BYPASS HEATUP OFF
OFF
0MIN
KEY SOUND
ON
ERROR SOUND ON
Press the down
arrow button to
scroll through the
list of parameters.