PAGE 1
(314) 205-3033
WWW.DIODEDYNAMICS.COM
Universal Underglow LED Kit
Installation Guide
Thank you for purchasing the Diode Dynamics Underglow LED Kit!
Tools Needed:
Drill with 3/4” bit, Needle Nose Pliers, Phillips Screwdriver, Flathead
Screwdriver, Socket Wrench Set
1.
Locate where to mount the LED strips. Be sure that the surface is clean before
mounting. Mount the LED strips using the 3M adhesive backing. Then use zip ties
to secure the LED strips.
2.
Connect the ring terminal from the black wire on the wiring harness to a chassis
ground or the negative terminal on the battery.
WARRANTY
3 YEAR
Wiring Harness
A
See back for further instructions.
