PAGE 1
(314) 205-3033
WWW.DIODEDYNAMICS.COM
Universal Footwell LED Kit
Installation Guide
Thank you for purchasing the Diode Dynamics LED Footwell Kit!
Please watch our installation video on YouTube prior to installation.
Tools Needed:
Drill with 3/4” bit, Needle Nose Pliers, Phillips Screwdriver, Flathead
Screwdriver, Socket Wrench Set
1.
Locate a 12 volt power source and ground. Often times, this can be found on your
12V outlet/cigarette lighter, or your vehicle’s ignition.
2.
Using the provided red quick-splice connectors, splice the red power wire and
the black ground wire to the 12V power source and ground located in step one.
3.
Connect the strips to the wiring harness:
Multicolor RGBW Kit:
Plug the DC connector into the included DC-to-DT adapter
wire. Then plug the DT connector into your RGBW controller. Plug the M8 connector
on each strip into the controller.
Single Color Kit:
Insert the red (+) and black (-) wires on each strip into the positive (+)
and negative (-) slots on the green tip of the DC screw terminal. Plug each DC screw
terminal into the splitter wire. Then plug the splitter wire into the DC connector .
4.
Connect the pink spade connectors to the silver pins on the back of the switch.
Connect the additional ground wire to the copper pin on the switch, and ground it
to any bare metal bolt .
WARRANTY
3 YEAR
A
D
B
C
B
A2
A1
