5 Configurations on Web Interface
UC100-1
V
1S1O User Manual
Copyright©2011-2016 Dinstar
37
Figure 5-30 Create Filter Rule
Table 5-6 Explanation of Parameters for Filter Rule
LAN IP
The IP address that you want UC100 to accept or reject. It is the IP
address of a host from local-area network; it can also be a string of
IP addresses, for example, 172.16.11.1/15.
LAN Port
The port of LAN host which the accepted or rejected IP address
belongs to
LAN MAC
The Mac of the LAN host twhich the accepted or rejected IP
address belongs to
WAN IP
The IP address that you want UC100 to accept or reject. It is the IP
address of a host from wide-area network; it can also be a string of
IP addresses, for example, 152.16.11.11/19.
WAN Port
The port of WAN host which the accepted or rejected IP address
belongs to
Action
Choose accept ot reject
5.4.4
DHCP Server
If there is a need, you can choose to enable the built-in DHCP server of UC100-1G1S1O to
assign IP addresses to PC or other clients that are in the same local-area network with UC100.
Under this condition, the UC100-1G1S1O gateway works like a router.