Dinstar UC100-1V1S1O, Руководство пользователя, Страница: 13 / 92

2 Quick Installation
UC100-1
V
1S1O User Manual
Copyright©2011-2016 Dinstar
7

Connect the power adapter to the power jack;
 Connect telephone line to the FXS port and connect PSTN line to the FXO port;
 Connect network cable to the LAN port(s) and WAN port (please refer to 2.3 Network
Connection);

Insert a SIM card to the SIM slot.
2.3 Network Connection
UC100-1G1S1O works in two network modes: route mode and bridge mode. When it is under
the route mode, the IP address of WAN port must be different from the IP address of LAN
port. But when it is under the bridge mode, the IP address of WAN port and that of LAN port
are the same.
2.3.1
Network Connection Diagram under Route Mode
Under the route mode, the default IP address of WAN port is a DHCP IP address, while the
default IP address of the LAN port is a static IP address, namely 192.168.11.1.
Figure 2-1 Network Connection Diagram under Route Mode
Router
192.168.1.XXX 192.168.11.1
192.168.11.XXX
UC100-1G1S1O
DHCP Server
DC12V WAN LAN0 LAN1 LAN2 FXS
WPS
RST
IP Netowk
FXO
Note: The IP address of LAN port of the gateway and the IP address of PC must be at the
same network segment, while that of WAN port is at a different network segment.
2.3.2
Network Connection Diagram under Bridge Mode
Under the Bridge mode, the IP address of WAN port is the same with that of LAN port.
Generally, when the gateway works under the bridge mode, the IP address of the gateway has