Dinstar SBC1000, Руководство пользователя

Страница: 18 / 71

3 Configurations on Web Interface
SBC1000 Session Border Controller
Copyright©2011-2018 Dinstar
12
Note:
At the first time that the SBC1000 device is used, only the Admin port is allowed to visit the Web interface (other
network ports are disabled). If you want to connect the SBC1000 device through other network ports, please connect
the Admin port to a PC and log into the Web interface of the device, and then enable GE0, GE1, GE2 and GE3 ports
on the Security

Access Control page.
Log in Web Interface
Open a web browser and enter the IP address of the Admin port of SBC1000 (https:// 192.168.11.1). Then input
username, password and verification code on the displayed login GUI. The default username is admin , while the
default password is admin@123# .
Figure 3-1 Login GUI
For security consideration, it is suggested that you should modify the username and password on the System

Users page.
Figure 3-2 Modify Password