Dinolift DINO XT II 160, Руководство по эксплуатации

Страница: 39 / 73

39
5.1.2. Positioning the lift
1. make sure that the ground is even and hard enough to support the lift in a steady, level
position
Soil material Density
Max. ground
pressure
P kg/cm² (N/cm²)
Gravel High density 6 (59)
Medium density 4 (39)
Loose 2 (20)
Sand High density 5 (49)
Medium density 3 (29)
Loose 1.5 (15)
Fine sand High density 4 (39)
Medium density 2 (20)
Loose 1 (10)
Sand/ mud High density (very hard to work) 1.00 (10)
Medium density (hard to work) 0.50 (5)
Loose (easily worked) 0.25 (3)
2. Check that the standing surface is free from potholes, pits or too inclined areas.
3. Check that the movement area of the outriggers and the boom, as well as the area under
the outriggers, are free from obstacles, which could cause collision or turn the machine
over.
DANGER
WARNING
CAUTION
NOTICE
Tip over hazard! If the ground is soft, use sufficiently large and sturdy additional plates
under the support outriggers.
4. Drive or push the lift to the inspected lifting site
5. Engage the parking brake
6. Disconnect the lift from the towing vehicle
P
DINO