Dini Argeo EGT scale series, Руководство пользователя

Страница: 50 / 59

DOSAGE
50
6.16.1 Enabling the production program
Through BATCH1 function Enable production which can be combinable with the desired key ( ), one is
asked to enable/disable the function. The same setting is possible also in the setup environment.
6.16.2 Setting the production program
Through BATCH1 function Manage production which can be combinable with the desired key ( ), one is
asked firstly to input the number of formulas, from 1 to 4: press the enter key, input the number and
confirm with OK key.
6.16.3 Enabling production program cycle
The cycle is automatically enabled as soon as it is programmed: the instrument enables the first
programmed formula and waits its start.
Number of formula in execution
6.16.4 Production end terminate
The present production will be terminated when the present production cycle is totally executed. It will
ignore the rest production cycles.
6.16.5 Stop production immediately
The production will be paused and reset immediately in any status of the executed formula.
6.16.6 Printing of the production program report
Through BATCH printing function Print last production which can be combinable with the desired key
( ), the report of the last executed production program is printed.
6.17 Functioning of the remote components’ dosage
The function allows to control remotely an instrument (DGTQF,DGTPF,DGTPKF,DFWF series) so that it
executes a single component dosage in the loading or unloading (see
<<btC.1-L>> or <<btC.1-u>> step, see
the relative technical manual), or multi componens dosage (see <<bAtCh>> step, see the relative technical