Dini Argeo DGT1SX, Руководство пользователя

Страница: 45 / 60

45
Optimized layout for A4 print.
1
onde
485
repe.6
modbus
Prin.st
prin.ex
1
5
9
2
6
10
3
7
11
4
8
pCmode
all.std
all.ext
stab.st
all.max
stab.ex
4
5
3
2
9600
115200
4800
57600
2400
38400
1200
19200
1
5
2
6
3
7
4
8
baud
none
7
even
1
odd
2
8
1
2
2
1
3
2
1
parity
bit
stop
USER_MAN_ENG_DGT1SX
LEGEND:
Indicates repeated pressing of
the key.
Parameter visible only
under certain conditions.
Parameter or menu subject
to approval.
Default value of the parameter.
Transmission mode
Transmission on demand.
Standard string transmission when the key is pressed.
Transmission with Modbus protocol (refer to the Modbus protocol manual).
Transmission of the weight on DINI ARGEO 6-digit repeater.
Transmission with 485 protocol (enter the 485 address of the transmitter).
Extended string transmission when the key is pressed.
Continuous transmission of the extended string (select the transmission frequency, about 1 ÷ 80 Hz).
Continuous high speed weight transmission for conversion applications (single channel only)
Stable transmission of the extended string.
Continuous transmission of the standard string (select the transmission frequency, about 1 ÷ 80 Hz).
Stable transmission of the standard string.
Baud rate, parity, data bits, stop bits
Odd.
2 stop bits.
7 bits.
Even.
1 stop bit.
No parity, 8 data bits, 1 stop bit.
8 bits.
Configuration of the 485 port (PC port)
When selecting one of these protocols, you are asked if you want to display the 485 address at the beginning of the string:
DEV.ID YES
/
No
.